Use a Pneumatic Forklift
Pneumatic forklifts are common in shipping and warehouse operations. Also called pallet trucks or pump trucks, they are utilized in order to transport products and supplies around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight includes a pump that lifts the forks off the ground. A pallet truck is intended to be operated by a single individual.
Pallet trucks must be operated carefully in order to avoid loss of control while lifting heavy loads. Equipment must be inspected before operating. Clear the wheels area of any obstructions. Check that the handle could turn smoothly. The pallet should be carefully stacked to be able to guarantee that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop in order to lower the forks and release the air in the pump. The forks could then be pushed into the pallet slots. The forks should be in the middle to ensure even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the pneumatic lift's handle until the pallet has fully cleared the ground. Do not raise the pallet very high or the forklift can unbalance.
Move the pallet by pulling on the handle and dragging it behind you. It is not safe to push the pallet in front of you because the momentum could cause it to go out of control. Slowly take turns and don't try to stop abruptly. Stop gradually, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.