Forklift Attachments Scottsdale - Many different jobs would be impossible without the help of forklift attachments. The wide range of forklift attachments make most jobs not only possible but also safer and quicker. Forklift operators require training for each attachment they will be using as well as their general forklift training.
There are many non-hydraulic attachments and hydraulic attachments available for forklift attachments. They provide many benefits including decreasing fuel consumption, time, man-power, damage to stock and employee accidents.
Equipment Considerations
Forklift attachments can be switched out to replace existing attachments or may be used on machines that don’t currently have one. Various considerations need to be taken prior to adding or replacing any forklift attachment. These considerations include the kind of forklift, the machine’s capacity, the number of hydraulic functions required to power the attachment’s and the type of carriage.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. Further safety factors must also be taken into consideration, which will be discussed in greater detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. Online calculators are available from manufacturers of forklift attachment’s to provide estimates on every attachments’ lifting capacity. However, only the forklift manufacturer can provide accurate lifting capacities.
Before installing any kind of attachment, it is essential to contact the local authorized forklift dealer of the particular forklift brand to request that they rate the machine accordingly with the attachment being used. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. The upgraded specification plate replaces the original plate and needs to be installed with the new forklift rating showing.
Equipment Upgrades
When dealing with forklift attachments it is important to note that a forklift’s hydraulic function is made up of a valve on the forklift with a lever located close to the operator which provides two passages of pressurized hydraulic oil to power the attachment features. While not all forklift attachments are hydraulic, hydraulic attachments often include more features than the forklift has valves. In these instances, one or more valves need to be added. There are several methods of adding a valve. The manufacturers of forklifts create accessories to simplify hose and valve routing. However, the parts and labor to install these can be so expensive as to make this option impractical. Alternative methods include adding a solenoid valve in conjunction with a hose or cable reel that diverts oil flow from an existing function. However, the operators’ view may be compromised due to the cable reels and hose installation. These parts also may be easily damaged by their location. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Proper training must be obtained prior to fitting any forklift attachment. Operators need to be competent with removing, operating and fitting the attachment before using it.
Before using any forklift attachment, two safety issues need consideration.
Firstly, it is important to note that any kind of forklift attachment will reduce the machine’s nominal load rating. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Using any type of forklift attachment will affect the center of gravity on the machine. This will reduce the forklift’s stability. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. As noted above, each attachment should be listed on the data plate of the forklift’s capacity.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are many more attachments available than are listed here but this will cover the most widely-used. As you will see, the large variety of attachments available have the capacity to greatly increase the efficiency of many jobs.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Dimensioning devices offer cargo dimensions to create more warehouse efficiency and better truck and trailer space. This is commonly used with billing systems that record volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
The roll and barrel clamp allows the forklift to grasp rounded loads including barrels. It is outfitted with different pressure settings to facilitate fragile options and often has a rotate function to simplify horizontal and vertical positioning.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp is for grasping loads with a squared shape. It also features pressure settings to handle bales, boxes and cartons.
POLE ATTACHMENTS:
Pole attachments are placed where the forks would normally be and are used for transporting carpet and rolled up linoleum.
SLIP SHEETER OR PUSH-PULL:
The slip sheeter or push-pull allows the operator to move sheets by clamping onto slip sheets. This is an option instead of relying on pallets. The slip sheet can be moved onto thin and wide metal forks to simplify loading or unloading by pushing the slip sheet. The “Save” variation allows the slip sheet to be taken off for reuse later. The “Standard,” attachment variation is another option.
DRUM HANDLER:
The drum handler is specifically designed to transport drums. It might feature arms to hold the drum or be a spring-loaded model to grip the top lid.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper helps to transfer loose or liquid items into other containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
Allows operation in a warehouse using two pallet stacking where one shelf is placed directly behind another with no aisle between the two.
SCALES:
Scales allow forklift operators to weigh their pallets during transport. This increases efficiency by providing simultaneous data and not making the operator travel back and forth to scales. This attachment can be used for operators who bill by weight in legal-for-trade applications.
SINGLE-DOUBLE FORKS:
Allow movement of a single pallet or platform or two pallets side by side. With the correct attachment/s a single forklift can be used for multiple specialist materials handling tasks alongside normal lifting tasks, thus reducing the need for owning a specialist unit alongside a normal unit and the larger running and maintenance costs associated with multiple units.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Skips facilitate fast and safe removal of waste to the proper waste or skip compactor. Skips are either a bottom-emptying model or a roll-forward type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
