As opposed to a sit-down model, the stand-up lift truck model is completely different to use. The way wherein you lift loads and your movements are completely different. If you do not have proper training for using a stand-up model, you could probably cause harm co-employees or to yourself. When using a stand-up model, you must follow the proper safety regulations. There are some basic operating standards which must be met when operating a stand-up model.
To start on a stand-up unit forklift, it is essential to get a good feel for the steering knob and the controls. Instead of a steering wheel, the steering is handled with the knob steering plate. Remember that this knob moves exceptionally fast, thus, you must get used to moving it gently in order to be certain not to over steer. The horn is situated on the control handle, like with the control for the fork movement and for backwards, forwards. The floor pedal allows the machinery to move.
When you are ready to start, turn the key to start the forklift. Be sure that your forks are not extended. If you are moving around the floor, the forks must be pointed slightly upwards. Do not drive with extended forks. If you are moving forward, move the control handle forward and step on the pedal to make the lift move forward. If you are backing up, be certain to beep your horn in order to warn people around you. Look behind you prior to stepping on the pedal so as to make sure the way is clear and safe. After that, pull the control handle towards you while stepping on the pedal. Always stay alert and focused and make sure that you are operating in a safe way at all times.
When it comes to turning corners, turn your steering knob in the direction you need to go while keeping your hand on the control handle and your foot on the power pedal. When turning right, the steering knob would move in a clockwise direction during forward travel. If you are turning left, your steering knob would go in a counter-clockwise direction.
If you have just utilized sit down models, the stand-up versions can take some getting used to. With some training and taking some time to know the machinery, you could handle loads quickly and efficiently in little time.